how to choose workover rigs
1. The product series is complete, and the maximum hook load is 700kn-2250kn.
2. The engine is an internationally famous brand, which can meet the emission level of national VI at most.
3. Hydraulic and mechanical transmission type is adopted, with stable transmission, low impact and high comprehensive efficiency.
4. The chassis of self-made oilfield special vehicle is adopted, which has excellent off-road performance, mobility and safety performance, and meets the complex road conditions of the oilfield.
5. Drawworks main brake adopts the band brake or hydraulic disc brake as optional. The auxiliary brake can be pneumatic push disc type, pneumatic caliper disc type and water brake. The sand drum is optional. The design and manufacture of drawwork parts comply with API 7K specification.
6. The mast is hydraulically raised and telescoped, and its design and manufacture comply with API 4f specification.
7. The drill floor size and height can be customized according to user requirements.
8. The electric, air and hydraulic circuit systems are controlled centrally, and the main components are imported well-known brand components.
9.Products with special environmental requirements such as alpine, desert, plateau and beach can be customized.
post by Cangzhou Fengliang Petroleum Machinery Co.,Ltd whatsapp:+8613512492572
| S/N | 产品型号 Product Model | XJ700DBHD | XJ900DBHD | XJ1100DBHD | XJ1350DBHD | XJ1600DBHD | XJ1800DBHD | XJ2250DBHD |
|---|---|---|---|---|---|---|---|---|
| 1 |
最大钩载 (千牛) Max. hook load (KN) |
700 | 900 | 1100 | 1350 | 1600 | 1800 | 2250 |
| 2 |
额定钩载 kN Rated hook load (KN) |
400 | 600 | 800 | 1000 | 1200 | 1500 | 1800 |
| 3 |
小修深度（73mm外加厚油管）(米) Repair depth (73mm EUE Tubing) (m) |
3200 | 4000 | 5500 | 7000 | 8500 | —— | —— |
| 4 |
大修深度（73mm钻杆）(米) Overhaul depth (73mm drill pipe) (m) |
2000 | 3200 | 4500 | 5800 | 7000 | 8000 | 9000 |
| 5 |
发动机功率（千瓦） Engine power (KW) |
257 | 294 | 405 | 405 | 485 | 405×2 | 485×2 |
| 6 |
绞车电机功率 （千瓦） Drawwork Motor power (KW) |
90 | 110 | 300 | 400 | 400 | 600 | 800 |
| 7 |
转盘电机功率 （千瓦） Rotary table Motor power (KW) |
—— | 55 | 200 | 200 | 200 | 400 | 400 |
| 8 |
游动系统绳数 Rope number of traveling system |
6 | 6 | 8 | 8 | 8 | 10 | 10 |
| 9 |
钢丝绳直径 （毫米） Wire rope diameter (mm) |
φ22 | φ26 | φ26 | φ26 | φ29 | φ32 | φ32 |
| 10 |
井架高度 (米) Mast height (m) |
171821 | 21252931 | 33 | 3335 | 3536 | 3839 | 3839 |
| 11 |
钻台高度 (米) Drill floor height (m) |
—— | 2.73.7 | 3.74.5 | 3.74.5 | 4.556 | 66.8 | 66.87.5 |
| 12 |
转盘开口直径 （毫米） Opening diameter of rotary table (mm) |
—— | 444.5 | 444.5 | 444.5 | 444.5 | 698.5 | 698.5 |
| 13 |
底盘驱动型式 Chassis drive type |
6×6 | 8×810*8 | 10×8 | 10×8 | 12×8 | 14×8 | 14×10 |
| 14 | 排放标准 Emission standard | 国Ⅵ National Standard VI | ||||||