Choke manifold
Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is,the device is adopted to execute new drilling-well's technique of balance pressure,which can avoid pollution of oil-layer,improve the speed of drilling and control blowout effectively.Kill Manifold consists of check valves, gate valves, pressure gauges and line pipes. One end of the kill manifold is connected to drilling spool and the other to pump.Kill manifold is necessary equipment in well-control system to pump drilling fluid into well barrel or inject the water into wellhead.
Our company’s choke and kill manifold falls into five class: 14MPa, 21MPa, 35MPa, 70MPa and 105MPa. Also, We can design according to customer demand.
Product parameters are as follows:
Mr.Steven
Whatsapp:+8613512492572
Control panel is the control device for hydraulic choke manifold. It can remote control the opening and closing of the hydraulic Choke valve and show the pressure of standpipe and casing pressure, and the switching position of hydraulic Choke valve. It can also show the strokes and frequency of the three Mud Pumps if equipped with pump stroke counter, which is an necessary equipment to control well kick,blowout and pressure balance.
Model description:
Technical parameters:
(1)Air pressure:0.6MPa
(2)Environment temperature:-20℃~+60℃
(3)Working pressure:3MPa
(4)Gas circuit quick coupling size:M16×1.5
(5)Oil passage quick coupling size:M22×1.5
(6)Hydraulic oil specification:cold resistance hydraulic oil
(7)L×W×H:960×600×1300
(8)NW:300kg